libusb, pyusb and python-escpos on a windows machine
I am trying to work with Epson POS TM-82 printer on windows 7 (64 bit). I have installed the printer's driver. I have python 2.7.15 (64 bit) installed. To work with python I am using this package, python-escpos.
After I have installed python-escpos, and try to run as documented, I am getting an error:
from escpos.printer import Usb
Usb(0x04b8, 0x0e11)
usb.core.NoBackendError: No backend available
After some more digging, I found this wiki, according to this I need to Use the most recent version of Zadig, an Automated Driver Installer GUI application for WinUSB, libusb-win32 and libusbK.
So, I downloaded Zadig; from the drop-down menu selected TM-82, and chose WinUSB to replace the driver and installed the driver succesfully.
After that again I ran the same python-escpos documented command from above, and got the same error:
usb.core.NoBackendError: No backend available
After some more research I found this answer on stackoverflow. So following the answer, I downloaded the libusb zip file, and copied
libusb-1.0.20_2MS64dlllibusb-1.0.libto myC:WindowsSystem32. And finally copiedlibusb-1.0.20_2MS64staticlibusb-1.0.libtoC:Python27libs
After that again I ran the same python-escpos documented command from above, and this time I got a different error:
NotImplementedError: Operation not supported or unimplemented on this platform
What am I missing here? Could you please help me. Thank you.
python libusb pyusb escpos escp
asked Nov 12 at 11:44
Kakar
1,67922948
add a comment |
I am trying to work with Epson POS TM-82 printer on windows 7 (64 bit). I have installed the printer's driver. I have python 2.7.15 (64 bit) installed. To work with python I am using this package, python-escpos.
After I have installed python-escpos, and try to run as documented, I am getting an error:
from escpos.printer import Usb
Usb(0x04b8, 0x0e11)
usb.core.NoBackendError: No backend available
After some more digging, I found this wiki, according to this I need to Use the most recent version of Zadig, an Automated Driver Installer GUI application for WinUSB, libusb-win32 and libusbK.
So, I downloaded Zadig; from the drop-down menu selected TM-82, and chose WinUSB to replace the driver and installed the driver succesfully.
After that again I ran the same python-escpos documented command from above, and got the same error:
usb.core.NoBackendError: No backend available
After some more research I found this answer on stackoverflow. So following the answer, I downloaded the libusb zip file, and copied
libusb-1.0.20_2MS64dlllibusb-1.0.libto myC:WindowsSystem32. And finally copiedlibusb-1.0.20_2MS64staticlibusb-1.0.libtoC:Python27libs
After that again I ran the same python-escpos documented command from above, and this time I got a different error:
NotImplementedError: Operation not supported or unimplemented on this platform
What am I missing here? Could you please help me. Thank you.
python libusb pyusb escpos escp
asked Nov 12 at 11:44
Kakar
1,67922948
add a comment |
I am trying to work with Epson POS TM-82 printer on windows 7 (64 bit). I have installed the printer's driver. I have python 2.7.15 (64 bit) installed. To work with python I am using this package, python-escpos.
After I have installed python-escpos, and try to run as documented, I am getting an error:
from escpos.printer import Usb
Usb(0x04b8, 0x0e11)
usb.core.NoBackendError: No backend available
After some more digging, I found this wiki, according to this I need to Use the most recent version of Zadig, an Automated Driver Installer GUI application for WinUSB, libusb-win32 and libusbK.
So, I downloaded Zadig; from the drop-down menu selected TM-82, and chose WinUSB to replace the driver and installed the driver succesfully.
After that again I ran the same python-escpos documented command from above, and got the same error:
usb.core.NoBackendError: No backend available
After some more research I found this answer on stackoverflow. So following the answer, I downloaded the libusb zip file, and copied
libusb-1.0.20_2MS64dlllibusb-1.0.libto myC:WindowsSystem32. And finally copiedlibusb-1.0.20_2MS64staticlibusb-1.0.libtoC:Python27libs
After that again I ran the same python-escpos documented command from above, and this time I got a different error:
NotImplementedError: Operation not supported or unimplemented on this platform
What am I missing here? Could you please help me. Thank you.
python libusb pyusb escpos escp
asked Nov 12 at 11:44
Kakar
1,67922948
I am trying to work with Epson POS TM-82 printer on windows 7 (64 bit). I have installed the printer's driver. I have python 2.7.15 (64 bit) installed. To work with python I am using this package, python-escpos.
After I have installed python-escpos, and try to run as documented, I am getting an error:
from escpos.printer import Usb
Usb(0x04b8, 0x0e11)
usb.core.NoBackendError: No backend available
After some more digging, I found this wiki, according to this I need to Use the most recent version of Zadig, an Automated Driver Installer GUI application for WinUSB, libusb-win32 and libusbK.
So, I downloaded Zadig; from the drop-down menu selected TM-82, and chose WinUSB to replace the driver and installed the driver succesfully.
After that again I ran the same python-escpos documented command from above, and got the same error:
usb.core.NoBackendError: No backend available
After some more research I found this answer on stackoverflow. So following the answer, I downloaded the libusb zip file, and copied
libusb-1.0.20_2MS64dlllibusb-1.0.libto myC:WindowsSystem32. And finally copiedlibusb-1.0.20_2MS64staticlibusb-1.0.libtoC:Python27libs
After that again I ran the same python-escpos documented command from above, and this time I got a different error:
NotImplementedError: Operation not supported or unimplemented on this platform
What am I missing here? Could you please help me. Thank you.
python libusb pyusb escpos escp
python libusb pyusb escpos escp
asked Nov 12 at 11:44
Kakar
1,67922948
asked Nov 12 at 11:44
Kakar
1,67922948
edited Nov 12 at 17:45
asked Nov 12 at 11:44
Kakar
1,67922948
asked Nov 12 at 11:44
Kakar
1,67922948
asked Nov 12 at 11:44
Kakar
1,67922948
1,67922948
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Answering my own question here. So, it turns out, the problem was with python-escpos library. I had to remove the following from the printer.py (python module of that library):
try:
check_driver = self.device.is_kernel_driver_active(0)
except NotImplementedError:
pass
if check_driver is None or check_driver:
try:
self.device.detach_kernel_driver(0)
except usb.core.USBError as e:
if check_driver is not None:
print("Could not detatch kernel driver: {0}".format(str(e)))
The details can be found on my blog on Medium.
answered Nov 21 at 5:20
Kakar
1,67922948
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53261467%2flibusb-pyusb-and-python-escpos-on-a-windows-machine%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Answering my own question here. So, it turns out, the problem was with python-escpos library. I had to remove the following from the printer.py (python module of that library):
try:
check_driver = self.device.is_kernel_driver_active(0)
except NotImplementedError:
pass
if check_driver is None or check_driver:
try:
self.device.detach_kernel_driver(0)
except usb.core.USBError as e:
if check_driver is not None:
print("Could not detatch kernel driver: {0}".format(str(e)))
The details can be found on my blog on Medium.
answered Nov 21 at 5:20
Kakar
1,67922948
add a comment |
Answering my own question here. So, it turns out, the problem was with python-escpos library. I had to remove the following from the printer.py (python module of that library):
try:
check_driver = self.device.is_kernel_driver_active(0)
except NotImplementedError:
pass
if check_driver is None or check_driver:
try:
self.device.detach_kernel_driver(0)
except usb.core.USBError as e:
if check_driver is not None:
print("Could not detatch kernel driver: {0}".format(str(e)))
The details can be found on my blog on Medium.
answered Nov 21 at 5:20
Kakar
1,67922948
add a comment |
Answering my own question here. So, it turns out, the problem was with python-escpos library. I had to remove the following from the printer.py (python module of that library):
try:
check_driver = self.device.is_kernel_driver_active(0)
except NotImplementedError:
pass
if check_driver is None or check_driver:
try:
self.device.detach_kernel_driver(0)
except usb.core.USBError as e:
if check_driver is not None:
print("Could not detatch kernel driver: {0}".format(str(e)))
The details can be found on my blog on Medium.
answered Nov 21 at 5:20
Kakar
1,67922948
Answering my own question here. So, it turns out, the problem was with python-escpos library. I had to remove the following from the printer.py (python module of that library):
try:
check_driver = self.device.is_kernel_driver_active(0)
except NotImplementedError:
pass
if check_driver is None or check_driver:
try:
self.device.detach_kernel_driver(0)
except usb.core.USBError as e:
if check_driver is not None:
print("Could not detatch kernel driver: {0}".format(str(e)))
The details can be found on my blog on Medium.
answered Nov 21 at 5:20
Kakar
1,67922948
edited Nov 21 at 5:28
answered Nov 21 at 5:20
Kakar
1,67922948
answered Nov 21 at 5:20
Kakar
1,67922948
answered Nov 21 at 5:20
Kakar
1,67922948
1,67922948
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53261467%2flibusb-pyusb-and-python-escpos-on-a-windows-machine%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
